Conductive Glycol Based Electrolyte Carbon Coated Aluminium Foil for Super Capacitor.
Quickly details.
- Basis Materials:aluminum foil.
- Density:1.0 -2.5g/m2.
- Treatment: coated.
- substrate Materials: Al foil.
- Product Type:CAW2.
Features:
1. Improve the surface tension.
2. Increase the adhesion between the aluminium foil and the active material.
3. Decrease the using amount of binder for the electrode.
Application:
| (LFP.LMO.NCM.NCA.LNM.LTO):for electric vehicles |
| (LFP.LMO.NCM.NCA.LNM.LTO):energy storage |
Physical and chemical properties (MTC of CAW2).
Planar density
(Both side) | 1.0g/m2
1.0±0.2mg/cm2 | 1.5g/m2
1.5±0.3mg/cm2 | 2.0g/m2
2.0±0.3mg/cm2 | 2.5g/m2
2.5±0.3mg/cm2 |
| Covering rate | min.80% | min.90% | Min.100% | min.100 |
| Conductivity | ~30S/cm | ~30S/cm | ~30S/cm | ~30S/cm |
| Peeling Strength | 2.0N | 2.0 N | 2.5N | 2.5N |
| Corrosion resistance | No exfoliation | No exfoliation | No exfoliation | No exfoliation |
Important Matters:
Usage and storage note:
Store the product below 35℃, do not open the vacuum package before use .after use ,the left product should be dried at 40-60℃ for 2 hours under vacuum ,then kept in the cabinet filled with nitrogen at room temperature.
Package:wooden carton.
FAQ:
Q1: What's your guarantee?
A: All our products have 6 months guarantee after received goods, if any quality problem can contact us.
Q2. what is your standard width?
A: 1000 mm,we accept customization for the width. we can cut it into any size that you demand after pass discussing.
.
Q3. what is the Requirements for the use of dust in the environment?
A: Avoid using the product under dust, The dust purification should be over 0.1M.
Product Tags:
|
|
Electrolyte Carbon Coated Aluminum Foil for Capacitor Conductive Glycol Based Images
|
